SP agitator-pumps series is designed for medium and big refrigerators where special voltages and frequency are required. These pumps are made with UL approved components.
>> Request Technical Details
>> Power cords available
>> Technical specification
Technical specification
Pump |
AGITATOR-PUMP with immersed vertical axis. |
Windings | Single-phase motor with Class F. |
Motor body | Casing in extruded aluminium. |
Protection | IP 54 degree of protection from liquids seepage. |
Safety | Built-in thermal motor protection system. |
Ball bearings | Ø 8mm NSK, SKF or equivalent, in semi-rigid and noise-insulated silicone casing. |
Motor shaft | AISI 303 INOX steel Ø 8mm. |
Fastening parts | INOX steel or anti-oxidant materials. |
Motor parts | Thermoplatic motor parts resistant to high temperature complying to UL regulation. |
Cooling system | Air cooled pump with a suction speed of 2,2 m/second. |
Water connection | Compatible with John Guest fittings. |
Operation | Power supply 220 & 230Volts – 24 hours a day no stop. |
Regulations | Complying to EN60335-2-41 and WEEE/RoHs directives. |
Note | PATENTED component installed inside. Read instruction manual for correct set up and use. |
TYPE | Volt | Hz | Amp | Watt | Rpm | A | B | C | Propeller Ø (mm) | Weight |
SP-9 | 220 | 50/60 | 0,31/0,28 | 63/66 | 2800/3300 | 90 | 185 | 78 | 50 2 Blades 15° | 1,50 |
SP-12 | 220 | 50/60 | 0,37/0,32 | 67/71 | 2900/3450 | 105 | 220 | 90 | 50 2 Blades 15° | 1,80 |
SP-19 | 220 | 60 | 0,49 | 107 | 3450 | 120 | 240 | 90 | 50 2 Blades 15° | 2,40 |
SP-25 | 220 | 60 | 0,73 | 155 | 3450 | 140 | 240 | 90 | 50 2 Blades 15° | 3,00 |
Performance and electrical data has been tested at 0°C with clean water only.