RIO series represents innovative, highly efficient and reliable pumps, with extremely compact dimensions and long life expectancy. These motor-pumps are designed for internal or external installation. The complete encapsulation of the motor guarantees the full protection of the windings from dampness.
>> Request Technical Details
>> Power cords available
>> Technical specification
Technical specification
Pump |
AGITATOR-PUMP with immersed vertical axis. |
Windings | Single-phase motor with Class F. |
Motor body | Motor covered by plastic shell in PA66 30% glass fiber. |
Protection | IP 55 degree of protection from liquids seepage. |
Safety | Built-in thermal motor protection system. |
Ball bearings | Ø 8mm NSK, SKF or equivalent, in semi-rigid and noise-insulated silicone casing. |
Motor shaft | AISI 303 INOX steel Ø 8mm. |
Fastening parts | INOX steel or anti-oxidant materials. |
Motor parts | Thermoplatic motor parts resistant to high temperature. |
Cooling system | Water cooled pump. |
Water connection | Pipe connection Ø 9,5/12,3mm compatible with John Guest fittings. |
Operation | Power supply 220 & 230Volts – 24 hours a day non stop. |
Regulations | Complying to EN60335-2-41 and WEEE/RoHs directives. |
Note | PATENTED device. Read the instruction manual for correct set up and use. |
TYPE | Volt | Hz | Amp | Watt | Rpm | A | B | C | Propeller Ø (mm) | Weight |
RIO-6 | 230 | 50 | 0,18 | 45 | 2800 | 75 | 185 | 78 | 50 2 Blades 15° | 1,45 |
RIO-7 | 230 | 50 | 0,20 | 48 | 2800 | 75 | 220 | 90 | 50 2 Blades 15° | 1,50 |
RIO-11 | 230 | 50 | 0,35 | 77 | 2800 | 85 | 210 | 90 | 50 2 Blades 15° | 1,90 |
RIO-18 | 230 | 50 | 0,52 | 104 | 2800 | 100 | 200 | 90 | 50 2 Blades 15° | 2,40 |
Performance and electrical data has been tested at 0°C with clean water only.