ECO agitator-pump series is suitable for medium sized equipment and, thanks to its compact size and full motor protection, can be installed either inside or outside the refrigerator.
>> Request Technical Details
>> Power cords available
>> Technical specification
Technical specification
Pump |
AGITATOR-PUMP with immersed vertical axis. |
Windings | Single-phase motor with Class F. |
Motor body | Motor covered by plastic shell in PA66 30% glass fiber. |
Protection | IP 55 degree of protection from liquids seepage. |
Safety | Built-in thermal motor protection system. |
Ball bearings | Ø 8mm NSK, SKF or equivalent, in semi-rigid and noise-insulated silicone casing. |
Motor shaft | AISI 303 INOX steel Ø 8mm. |
Fastening parts | INOX steel or anti-oxidant materials. |
Motor parts | Thermoplatic motor parts resistant to high temperature. |
Cooling system | Water cooled pump. |
Water connection | Compatible with John Guest fittings. |
Operation | Power supply 220 & 230Volts – 24 hours a day non stop. |
Regulations | Complying to EN60335-2-41 and WEEE/RoHs directives. |
Note | Read the instruction booklet for a correct set up and use. |
TYPE | Volt | Hz | Amp | Watt | Rpm | A | B | C | Propeller Ø (mm) | Weight |
ECO-4 | 230 | 50 | 0,29 | 40 | 2700 | 68 | 185 | 63 | 40 2 Blades 15° | 1,60 |
ECO-6 | 230 | 50 | 0,48 | 69 | 2750 | 74 | 178 | 78 | 40 2 Blades 15° | 1,79 |
Performance and electrical data has been tested at 0°C with clean water only.