The ASM series uses single-phase motors and have been specifically designed for machine tools, ceramic and glass process machinery, and for all those cases in which liquids or coolants must be moved.
>> Request Technical Details >> Accessories
>> Technical specification
Technical specification
Pump |
CENTRIFUGAL-PUMP with immersed vertical axis. |
Windings | Single-phase motor with Class F winding. |
Motor body | Casing in extruded aluminium. |
Protection | IP 54 degree of protection from seepage of liquids. |
Safety | Built-in thermal motor protection system. |
Ball bearings | Ø 8mm NSK, SKF or equivalent, in semi-rigid and noise-insulated silicone casing. |
Motor shaft | AISI 303 stainless steel shaft. |
Connection | Motor power cord 110 cm long without plug. |
Immersion | Motor-driven pump with immersed vertical axis without clamping devices. |
Optional | Upon request the pumps can be assembled with fastening parts in stainless steel or antioxidant materials. |
Power supply | Voltages and frequencies according to customer’s specific requirements can be supplied. |
Note | PATENTED device. Read the instruction booklet for correct set up and use. |

TYPE | Volt | Hz | KWatt(IN) | Hp | Rpm | D | L | Kg |
ASM 30 | 220/240 | 50/60 | 0,075 | 0,10 | 2800/3350 | 3/8″ | 85/120/150/180/200/250 | 1,77 |
ASM 30 | 380/400 | 50/60 | 0,075 | 0,10 | 2800/3350 | 3/8″ | 85/120/150/180/200/250 | 1,77 |
ASM 30 | 110/115 | 60 | 0,075 | 0,10 | 3200 | 3/8″ | 85/120/150/180/200/250 | 1,77 |
ASM 60 | 220/240 | 50 | 0,075 | 0,12 | 2800 | 1/2″ | 85/120/150/180/200/250 | 1,77 |
ASM 60 | 380/400 | 50 | 0,075 | 0,12 | 2800 | 1/2″ | 85/120/150/180/200/250 | 1,77 |
ASM 60 | 220/240 | 60 | 0,075 | 0,12 | 3200 | 1/2″ | 85/120/150/180/200/250 | 1,77 |
ASM 60 | 380/400 | 60 | 0,075 | 0,12 | 3200 | 1/2″ | 85/120/150/180/200/250 | 1,77 |
Performance and electrical data has been tested at 0°C with clean water only.