MD-50
MD-50 series is an agitator solution that satisfies the most restrictive low budget requirements while granting good performance. The wide range of configurations available makes it a versatile solution for many installations.
| TYPE | Volt | Hz | Amp | Watt | RPM | A | B | Propeller Ø [mm] | Weight [Kg] |
|---|---|---|---|---|---|---|---|---|---|
| MD-50 | 230 | 50-60 | 0,50 | 42 | 2850-3400 | 93/90 | 155/185/220 | 40x30° 2 Blades | 1,7 |
| MD-50 | 230 | 50-60 | 0,50 | 45 | 2850-3400 | 93/90 | 155/186/221 | 45x30° 2 Blades | 1,7 |
| MD-50 | 230 | 50-60 | 0,50 | 45 | 2850-3400 | 93/90 | 155/187/220 | 50x15° 2 Blades | 1,7 |
| MD-50 | 230 | 50-60 | 0,50 | 46 | 2850-3400 | 93/90 | 155/188/221 | 55x15° 2 Blades | 1,7 |
| MD-50 | 230 | 50 | 0,50 | 47 | 2850-3400 | 93/90 | 160/193/226 | 62x15° 2 Blades | 1,7 |
Available FIXING PLATES
106×106 mm
Fixing plates
141×110 mm
Fixing plates
Available CABLE types
BIPOLAR (without plug)
C14 (IEC 60320)
More technical specifications:
Category: Protected AGITATOR.
Windings: Single-phase motor. Insulation Class F.
Motor body: Shaded poles motor.
Protection: IP 31 ingress protection rating.
Safety: Built-in thermal motor protection system.
Ball bearings: NSK and SKF (long-life) self-lubricant bearings or equivalent, in semi-rigid noise-damping housings.
Motor shaft: AISI 303 INOX steel.
Fastening parts: INOX steel or corrosion-resistant materials.
Motor parts: Thermoplastic motor parts resistant to high temperature.
Cooling system: Air cooled pump with a suction speed of 3,1 m/s.
Operation: Power supply 220-240 Volts – 24 hours a day non stop. Clean non drinkable water only.
Regulations: Complying with EN60335-2-41:2003/A2:2010 and WEEE/RoHs directives.
Note: PATENTED device. Read the instruction booklet for correct set up and use.
Designed for industrial use with CE certified cooler machinery only. Not intended for food contact.
