

RIO series
RIO series is a very compact solution suitable for poorly ventilated installations. Its encapsulated design grants protection from dust and dampness even in the most particular applications.
| TYPE | Volt | Hz | Amp | Watt (IN) | RPM | A | B | C | Ø OUT | Propeller Ø [mm] | Weight [Kg] |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RIO-4 ❄︎ | 220-240 | 50 | 0,15 | 35 | 2800 | 73 | 145 | 64 | 9,5 | 50x15° 2 Blades | 1,4 |
| RIO-6 ❄︎ | 220-240 | 50 | 0,18 | 45 | 2800 | 73 | 185 | 78 | 9,5 | 50x15° 2 Blades | 1,4 |
| RIO-7 ❄︎ | 220-240 | 50 | 0,20 | 48 | 2800 | 73 | 220 | 90 | 9,5 | 50x15° 2 Blades | 1,5 |
| RIO-11 | 220-240 | 50 | 0,35 | 77 | 2800 | 85 | 210 | 90 | 9,5 | 50x15° 2 Blades | 1,9 |
| RIO-18 | 220-240 | 50 | 0,52 | 104 | 2800 | 100 | 200 | 90 | 9,5 | 50x15° 2 Blades | 2,4 |
Available CABLE types
BIPOLAR (without plug)
C14 (IEC 60320)
SCHUKO
AMP
More technical specifications:
Category: AGITATOR-PUMP with immersed vertical axis.
Windings: Single-phase motor. Insulation Class F.
Motor body: Overinjected PA66-30% glass fiber plastic shell.
Protection: IP 54 ingress protection rating.
Safety: Built-in thermal motor protection system.
Ball bearings: Ø 8 mm NSK, SKF or equivalent, in semi-rigid noise-damping silicone casing.
Motor shaft: AISI 303 INOX steel Ø 8 mm.
Fastening parts: INOX steel or corrosion-resistant materials.
Motor parts: Thermoplastic motor parts resistant to high temperature.
Cooling system: Water cooled pump.
Water connection: Pipe connection Ø 9,5/12,3 mm compatible with John Guest fittings.
Operation: Power supply 220-240 Volts – 24 hours a day non stop. Clean non drinkable water only.
Regulations: Complying with EN60335-2-41:2003/A2:2010 and WEEE/RoHs directives.
Note: PATENTED device. Read the instruction booklet for correct set up and use.
Designed for industrial use with CE certified cooler machinery only. Not intended for food contact.


