ESP series
ESP series is an agitator pump solution dedicated to multiple-tower installations.
It adds, to the long life reliability of the ST series, the possibility to connect simultaneously up to six cooling circuits using just one pump.
| TYPE | Volt | Hz | Amp | Watt (IN) | RPM | A | B | C | Ø OUT | Propeller Ø [mm] | Weight [Kg] |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ESP-7.2 | 220-240 | 50 | 0,28 | 60 | 2890 | 105 | 200 | 90 | 9,5/12,3 | 50x15° 2 Blades | 1,8 |
| ESP-7.3 | 220-240 | 50 | 0,28 | 61 | 2890 | 105 | 200 | 90 | 9,5/12,3 | 50x15° 2 Blades | 1,8 |
| ESP-12.2 | 220-240 | 50 | 0,41 | 96 | 2730 | 105 | 200 | 90 | 9,5/12,3 | 50x15° 2 Blades | 1,9 |
| ESP-12.4 | 220-240 | 50 | 0,43 | 95 | 2700 | 105 | 200 | 90 | 9,5/12,3 | 50x15° 2 Blades | 1,9 |
| ESP-12.6 | 220-240 | 50 | 0,50 | 115 | 2800 | 119 | 190 | 90 | 9,5 | 50x15° 2 Blades | 2,5 |
| ESP-18.2 | 220-240 | 50 | 0,52 | 113 | 2850 | 119 | 221 | 90 | 9,5/12,3 | 50x15° 2 Blades | 2,6 |
Available FIXING PLATES
141×110 mm
Fixing plates
150×120 mm
Fixing plates
Available CABLE types
BIPOLAR (without plug)
C14 (IEC 60320)
SCHUKO
AMP
FASTON PLUG
More technical specifications:
Category: AGITATOR-PUMP with immersed vertical axis.
Windings: Single-phase motor. Insulation Class F.
Motor body: Extruded aluminium casing.
Protection: IP 44 ingress protection rating.
Safety: Built-in thermal motor protection system.
Ball bearings: Ø 8 mm NSK, SKF or equivalent, in semi-rigid noise-damping silicone casing.
Motor shaft: AISI 303 INOX steel Ø 8 mm.
Fastening parts: INOX steel or corrosion-resistant materials.
Motor parts: Thermoplastic motor parts resistant to high temperature.
Cooling system: Air cooled pump with a suction speed of 2,2 m/s.
Water connection: DOUBLE (ESP-7.2) or TRIPLE (ESP-7.3) connection Ø 9,5/12,3mm John Guest fittings.
Operation: Power supply 220-240 Volts – 24 hours a day non stop. Clean non drinkable water only.
Regulations: Complying with EN60335-2-41:2003/A2:2010 and WEEE/RoHs directives.
Note: Italian PATENTED component installed inside. Read the instruction booklet for correct set up and use.
Designed for industrial use with CE certified cooler machinery only. Not intended for food contact.
