DBS MULTI FLOW series
DBS Multi Flow series extends the advantages of the DBS reversed ventilation design adding multiple outlets. It is the perfect solution for multiple-tower installations where you need to fit only one pump in a compact space.
| TYPE | Volt | Hz | Amp | Watt (in) | RPM | A | B | C | Ø OUT | Propeller Ø [mm] | Weight [Kg] |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DBS-5.6 | 220-240 | 50 | 0,30 | 73 | 2800 | 95 | 204 | 90 | 9,5 | 66x15° 2 Blades | 1,9 |
| DBS-7.3 ❄︎ | 220-240 | 50 | 0,28 | 61 | 2890 | 95 | 198 | 90 | 9,5/12,3 | 50x15° 2 Blades | 1,8 |
| DBS-12.3 | 220-240 | 50 | 0,41 | 95 | 2700 | 95 | 198 | 90 | 9,5/12,3 | 50x15° 2 Blades | 1,9 |
| DBS-17.3 | 220-240 | 50 | 0,53 | 114 | 2850 | 111 | 198 | 90 | 9,5/12,3 | 50x15° 2 Blades | 2,5 |
Available FIXING PLATES
141×110 mm
Fixing plates
150×120 mm
Fixing plates
Available CABLE types
BIPOLAR (without plug)
C14 (IEC 60320)
FASTON PLUG
More technical specifications:
Category: AGITATOR-PUMP with immersed vertical axis.
Windings: Single-phase motor. Insulation Class F.
Motor body: Extruded aluminium casing.
Protection: IP 44 ingress protection rating.
Safety: Built-in thermal motor protection system.
Ball bearings: Ø 8 mm (12 mm optional) NSK /SKF or equivalent, in semi-rigid noise-damping silicone casing.
Motor shaft: AISI 303 INOX steel Ø 8mm.
Fastening parts: INOX steel or corrosion-resistant materials.
Motor parts: Thermoplastic motor parts resistant to high temperature.
Cooling system: Air cooled pump with a suction speed of 3,1 m/s.
Water connection: TRIPLE connection Ø 9,5/12,3 mm John Guest fittings.
Operation: Power supply 220-240 Volts – 24 hours a day non stop. Clean non drinkable water only.
Regulations: Complying with EN60335-2-41:2003/A2:2010 and WEEE/RoHs directives.
Note: PATENTED device. Read the instruction booklet for correct set up and use.
Designed for industrial use with CE certified cooler machinery only. Not intended for food contact.
