DBS-M series
DBS-M series upgrades the standard DBS pump, adding a probe able to sense the tank’s temperature and adjust the motor’s speed. This saves the ice bank reducing the whole system energy consumption while ensuring a constant beverage quality.
Additional options available on demand.
| TYPE | Volt | Hz | Amp | Watt (in) | RPM | A | B | C | Ø OUT | Propeller Ø [mm] | Weight [Kg] |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DBS-7M1 ❄︎ | 220-240 | 50 | 0,18 | 43 | 2800 | 82 | 195 | 90 | 9,5 | 50x15° 2 Blades | 1,7 |
| DBS-18M1 ❄ | 220-240 | 50 | 0,46 | 99 | 2900 | 111 | 232 | 90 | 9,5 | 50x15° 2 Blades | 1,8 |
Available FIXING PLATES
141×110 mm
Fixing plates
141×110 mm JG
Fixing plates
106×106 mm
Fixing plates
106×106 mm JG
Fixing plates
150×120 mm
Fixing plates
Available CABLE types
C14 (IEC 60320)
More technical specifications:
Category: AGITATOR-PUMP with immersed vertical axis.
Windings: Single-phase motor. Insulation Class F.
Motor body: Extruded aluminium casing.
Protection: IP 44 ingress protection rating.
Safety: Built-in thermal motor protection system.
Ball bearings: Ø 8 mm NSK, SKF or equivalent, in semi-rigid noise-damping silicone casing.
Motor shaft: AISI 303 INOX steel Ø 8 mm.
Fastening parts: INOX steel or corrosion-resistant materials.
Motor parts: Thermoplastic motor parts resistant to high temperature.
Cooling system: Air cooled pump with a suction speed of 3,1 m/s.
Water connection: Compatible with John Guest fittings.
Operation: Power supply 220-240 Volts – 24 hours a day non stop. Clean non drinkable water only.
Regulations: Complying with EN60335-2-41:2003/A2:2010 and WEEE/RoHs directives.
Note: PATENTED device. Read the instruction booklet for correct set up and use.
Designed for industrial use with CE certified cooler machinery only. Not intended for food contact.
