MMP
| TYPE | Ph | Volt | Hz | Amp | Watt (IN) | RPM | A | B | H max | F max | Weight [Kg] |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MMP-6 | 1 | 230 | 50 | 0,3 | 58 | 2900 | 136 | 40 | 6 | 15 | 2,0 |
| MMP-12 | 1 | 230 | 50 | 0,5 | 110 | 2900 | 151 | 57 | 12 | 18 | 2,7 |
| MMP-17 | 1 | 230 | 50 | 0,7 | 150 | 2800 | 151 | 74 | 17 | 18,5 | 2,8 |
| MMP-21 | 1 | 230 | 50 | 1,0 | 200 | 2800 | 171 | 91 | 21 | 18,5 | 3,3 |
Available FIXING PLATES
69×59 mm
Fixing plates
Available CABLE types
More technical specifications:
Category: Magnetically coupled centrifugal circulator.
Windings: Single-phase motor. Insulation Class F.
Motor: Extruded aluminium casing.
Protection: IP 44 ingress protection rating.
Safety: Built-in thermal motor protection system.
Ball bearings: Ø 8 mm (12 mm optional) NSK /SKF or equivalent, in semi-rigid noise-damping silicone casing.
Motor shaft: AISI 303 INOX steel Ø 8 mm.
Fastening parts: INOX steel or corrosion-resistant materials.
Motor parts:Thermoplastic motor parts resistant to high temperature.
Cooling system: Air cooled pump with a suction speed of 3,1 m/s.
Water connection: Preset swiveling/adjustable discharge outlet, with John Guest fittings.
Operation: Power supply 220-240 Volts – 24 hours a day non stop. Clean non drinkable water only max 50° C.
Regulations: Complying with EN60335-2-41:2003/A2:2010 and WEEE/RoHs directives.
Note: PATENT pending. Read the instruction booklet for correct set up and use. All models in the range are designed for use with pure water.
They are NOT self priming. Solids will cause jamming. Abrasive will reduce pumps life and invalidate the warranty.
Never run dry – 20 seconds to damage
