JET submersed pump is completely hermetic, suitable for both submerged and external use. Ideal for biological and under-sand filters, it can be joined to any rigid or flexible pipe. Exceptional performances with low energetic consumption and low price.
>> Request Technical Details
>> Technical specification
Technical specification
Pump |
SUBMERSED PUMP. |
Protection | IP 68 degree of protection from liquids seepage. It is provided with gasket O-Ring that guarantees a perfect seal even if used fully submerged. Maximum depth one metre |
Safety | Motor is self protected by its own impedence (Z.P.). Doesn’t overheat, even if it runs dry or with jammed rotor. |
Water connection | Adjustable outlet suited for both stiff and flexible tubes. |
Operation | Power supply 220 & 230 Volts – 24 hours a day non stop. |
Connection | Bipolar cord with euro plug. |
Noise | Silent mono-block rotor with anti-noise mechanism. If correctly used the pump doesn’t vibrate and doesn’t produce annoying noises. |
Regulations | Complying to EN60335-2-41. |
Note | Read the instruction booklet for correct set up and use. |

TYPE | Volt | Hz | Watt(IN) | Q[Lt/min] | H[m] | Weight Kg |
MJ-750 | 230 | 50 | 7,5 | 10,30 | 1,65 | 0,32 |
Performance and electrical data has been tested at 0°C with clean water only.